An above-the-knee amputation or transfemoral amputation performed through the femur or thigh bone. To obtain the best possible outcome for the patient and to enable the final fitting of the prosthesis to happen in an optimum amount of time, an ideal stump length needs to be achieved.
With advanced measurement techniques, we now able to achieve a perfect fitting socket for an active life you always dreamed about. Thanks to the most modern technologies available in the prosthetic industry. The need for an active life is for a prosthetic user is mandatory for a healthy life compared to his/her earlier life.
A perfect biomechanical influence in locomotion with lower limb prosthesis is primarily based on how good his socket is constructed [Primary Interface]. An appropriately designed socket system provides a comfortable interface for the transmission of body weight, Stability during stance phase, allow sufficient control on mobility, protect stump soft tissues and contribute suspension of the prosthesis.
Poor socket fitting not only limits mobility because of excessive shear or compressive forces, excessive torques but also cause friction between the skin and liner.
An appropriate suspension system also a critical aspect of good prosthetic design. A higher insight on suspension systems by the prosthetists ensures amputee’s functional needs are satisfied. The better the human-prosthetic connection, the more comfortable the prosthesis and the more effectively prosthesis can be controlled by the stump.
MOBILIS has hand skills on a unique socket system tested over 14,000 patients worldwide. A Perfect fitting socket is important for the function and comfort of a prosthetic leg, made with innovative CAD / CAM computer technology adapts optimally to the body.
a competent team with many years of practical experience in the application and further development brings you the most innovative socket technologies.
Can you believe a plaster cast free measurement can produce a perfect socket? YES! a precise individual width and angle measurements are later converted to a CAD file from a proven technology brings the magical test socket fits only for you.
A transfemoral test socket produced are mostly fitting perfect without second trial and with an advantage of good fit, better control of the prosthesis over the stem and full freedom of movement less. The socket has many compression areas on muscles for an absolute volume control
It is a positioning method used between Prosthetic foot relative to a socket. A static alignment method according to individual load line followed right from Prosthesis assembly where a Dynamic alignment is tested by the repetitive process to optimize amputee gait pattern by gait observation and induction of alignment adjustments when deviations are detected. This will help the prosthetic user to reduce excessive loading on sensitive areas and improve gait stability
It is a unique device now available in the United Arab Emirates with MOBILIS to correct static alignment of orthotics and Prosthetic devices. This positively effects on patient’s posture and mobility. Awkward positions are minimised. Users find it easier to maintain their balance by correcting the alignment.
With the new 3D L.A.S.A.R. Posture, cameras take a live recording of the patient standing on the measuring plate and transmit the image to a tablet PC. The measured forces are represented as lines on the tablet’s display, which are positioned with millimetre accuracy over the patient’s image.
Choosing the right joint is a done by a prosthetist from his experience, knowledge on the advanced systems, based on expected functional outcomes and its alignments. Each joint has a different alignment to follow. Prosthetic knees and feet are designed to meet the needs that fit it’s user’s lifestyle and activity level. A common query an amputee always has is, what types of knee joint he has to use for his prosthesis. A Polycentric knee is a very stable knee that allows for very fluid walking while a Microprocessor Knee is a computerized knee that responds automatically to the walking patterns of the patient and has added stability.
Choosing the proper component is a skilled job by an experienced prosthetist, and Hand skill in such modern technologies also plays an essential role in a successful outcome.
Your daily activity requirements and capabilities vary according to the individual from gentle, steady walking with the use of a walking aid around at home, modest walking in the community or average walking with the ability to vary speed or walking pattern like Going to the shops or confident outdoor walking or activities involving fast walking, jogging and climbing stairs includes Heavy-lifting, manual labour, recreational sports or even Activities involving Track and ﬁeld sports. Choosing the components according to your activity requirement are done carefully by our prosthetic clinicians.
Your new prosthetic cover is shaped into the form of a natural human leg. Its unique shape and surface of the cover expresses your character and lifestyle. A multitude of patterns, colours and inspiring designs provide individuality and charisma. The cover is 3D printed and attached to your prosthesis using state-of-the-art magnetic technology.
Please visit – 3D Printed Prosthetic
Lower Limb Prosthesis
Upper Limb Prosthesis
HD Silicone Prosthesis